Each woven product has its own unique character, from nubs and slubs to wonderfully flecked wild silk, the varied nature of yarns bring a distinctive look and feel to your woven wrap.
Sometimes these natural imperfections are incorrectly categorised as flaws, this article will illuminate and explain some of the distinctive characteristics of our favourite yarns.
Please note: all of our wraps are individually checked for quality before leaving our workshop and none of the Fabric Characteristics mentioned here will affect the integrity of your sling.
For more information on 2nd- & 3rd-grade items visit this article on our Woven Seconds.
Nubs & Slubs
Linen, hemp & wool are two yarns which are well-known for having little nubs and slubs along the length of the yarn.
Slubs occur when a yarn does not have a consistent diameter along the whole length of the thread. Where the yarn is thicker it interacts with the warp yarns differently causing visible slubs.
Nubs may appear as little lumps in the fabric or sometimes as little loops. These loops may look like pulls but they are actually a natural part of the yarn structure. They differ from a pull in that they are thin and a little wispy, and do not affect the fabric around them – i.e. there is no tension in the area around them. These can be left as they will not affect the integrity of the sling.
Slubs and nubs will be more noticeable if there is a high contrast between weft and warp, or if the linen yarn is especially thick.
You may also find references to ‘Slubby Tussah Silk’ & ‘Slubby Wool’ on our site. These are smooth yarns whose deliberately variegated texture leads to distinctive striped look as the diameter of the yarn varies across the weft – imitating the look of a linen or hemp slub.
Slubs are not considered flaws as they are part of the natural characteristics of the yarn.
Usually found on wild silk & cottolin blends, these are less prominent than the nubs and slubs of linen and hemp but can be seen for similar reasons.
The uneven texture and diameter of the yarn lead to the flecks on the weft yarn peeking through the warp where it is not part of the pattern. The yarns bobbly texture leads to a unique pattern of flecks appearing across the wrap.
These flecks are a normal part of many natural silk yarns, occurring during spinning, and they are part of the character of your wrap.
You may see something similar in a wrap with a cottolin warp, here natural plant fibers can be caught up in the weaving process leading to little flecks appearing in your wrap.
You may also have heard of ‘Confetti’ yarns, these are yarns that have been artificially manipulated to have different coloured flecks across their length. This gives a gorgeous speckled effect which looks like scattered confetti.
These slubs are intentionally highlighted and so are not considered flaws.
Weft Facing and Hybrid Weaves
Weft facing and hybrid weaves consist of two (or more) weft yarns running across one warp, the yarns drop down and pop up at different points allowing different parts of the pattern to be highlighted and giving designers more control over the placement of colour.
Due to the nature of this style of weaving it is necessary to ‘anchor’ the weave occasionally – this means you may see one of the wefts pop up where it is not part of the pattern. This is more obvious on wraps where there is a high contrast in the weft and warp yarns and is a normal characteristic of this style of weave.
Weavers knots are small knots in the fabric where the warp or weft has been repaired during the weaving process or where one spool of yarn has ended and a new spool of yarn has been added in. These do not weaken the fabric in any way.
When weaving if a warp yarn breaks this must be found and repaired immediately by the weaver, if the thread is not found and knotted then it will result in a missing thread (you can read more about these here).
Otherwise, when a spool of yarn finished and a new one needs to be added then a small knot is tied to secure the yarns and continue weaving.
Weaver’s knots are part and parcel of any woven fabric and so are not considered a flaw.
Skipping threads occasionally occur in the weaving process, this is where a weft yarn is not properly caught under the warp yarn.
Large skipping threads, or if there are lots in one area, are considered a flaw, however, a small number of little skipping threads across a long length of fabric are hard to avoid and therefore considered a normal characteristic of woven fabric.
If you come across an imperfection such as a small pull or shifting threads, both of which are common when using woven wraps, you can learn how to fix these with our How To Guides on our YouTube channel.
If you have any concerns about your woven wrap you can contact us on firstname.lastname@example.org.